I put the frame upside down on top of the roof, and put the sliders into the channels.
Then I flipped it around, and performed a small test by putting power to the motor wires. The roof closed and opened, but the sliders weren’t really running freely.
More on that later..
I closed the roof and flipped it (with help of my wife) again, upside down. The roof still had to be glued to the rear bow, above the rear window.
First I glued the front lip to the bar, and then the rear lip to the bar. This way I could nicely overlap them.
Before glueing, I made sure the roof and the bar (it can move a little from side to side) was in the middle of the frame.
Leave a Reply